Specifications

9
FITTING THE HANDLES
1. With the handle in position insert
the pin as shown.
2. Secure the pin using the split pin
provided as shown.
FITTING THE FEET/WHEEL KIT
1. Lay the generator on its front end
and attach the 2 feet as shown.
2. Fix each foot to the frame using
4 x Short Bolts & 4 x 12mm nuts.
3.
Fix the axles to the frame as
shown .
4. Slide both wheels on to the axles.
NOTE: Make sure that
the valve on
each wheel is on the
outside.
5. Secure the wheel to the axle using
the
split pin provided
6. Carefully place the generator
onto its wheels/feet.