Specifications

22
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The generator fails
to
start
Ignition switch is off Set the ignition switch to ‘on’
Not enough oil in the
gene
rator
Add more oil, See page 11
No fuel Add more fuel, See page 12
Spark plugs not working
correctly
Change the spark plugs, See
page 19
The generator fails
to
g
enerate
electricity
The device you are trying to
power is faulty
Make sure the device you want to
power is working properly
The AC breaker has activated Press the AC overload reset button
The generator is
di
fficult to start
The air filter is dirty Clean the air filter, See page 20
The fuel filter is dirty Clean the fuel filter, See page 21
If this does not solve your problem, please contact the Clarke service
department. See page 25