Specifications

16
DC POWER (FOR CHARGING CAR BATTERIES ONLY)
1. Start the generator. See page 13.
2. Connect the battery charging leads to the battery.
• Make sure you clamp the red wire to the positi
ve (+
) terminal and
the black wire to the negative (-) terminal of the battery.
3.
Connect the battery charging
leads to the generator.
• The battery will begin to charge
4. Monitor the voltage across the
b
a
ttery regularly during charging
and disconnect the battery when
the voltage reaches 14.4 volts.
DC OVER LOAD PROTECTOR
If the DC overload protector
activates,
wait for a few minutes and
then press the reset button shown on
the right.
WARNING: FOR YOUR SAFETY PERFORM THE FOLLOWING INSTRUCTIONS
IN THE ORDER SHOWN.
CAUTION: WHEN DISCONNECTING THE BATTERY, ALWAYS DISCONNECT
THE NEGATIVE LEAD FIRST.