Specifications

22
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The generator fails
to start
Igni
tion switch is off Set the ignition switch to ‘on’
Not enough oil in the
generator
Add mo
re oil, See page 11
No fuel Add more fuel, See page 12
Spark plugs not working
correctly
Change the spark plugs, See
page 19
The generator fails
to
gene
rate
electricity
The device you are trying to
power is faulty
Make sure the device you want to
power is working properly
The AC breaker has activated Press the AC overload reset button
The generator is
difficult to start
The air fil
ter is dirty Clean the air filter, See page 20
The fuel filter is dirty Clean the fuel filter, See page 21
If this does not solve your problem, please contact the Clarke service
department. See page 25