Service manual

Encore S20E 7/00
Machine Variables and Accessories
00901A Breakdown: 00900A Encore S20E 115V Base Machine
51447D 20" Polypropylene Brush
00902A Breakdown: 00900A Encore S20E 115V Base Machine
51453D Pad Driver
00911A Breakdown: 00910A Encore S20E 230V Base Machine
51447D 20" Polypropylene Brush
00912A Breakdown: 00910A Encore S20e 230V Base Machine
51453D Pad Driver
115 Volt
230 Volt
Accessories
Description Part No.
Pad Driver, Dual Direction 51453D
Base 57370A
Retainer 57369A
Pad/Brush Clutch Plate 66649A
Spacer 58531A
Clutch Plate Screws 962819
Clutch Plate Nuts 80084A
Pad/Brush Clutch Plate Dual 30033A
Spacer 58530A
Poly Brush Dual Direction (general scrub) 51447D
Nylon Brush .016 Dual Direction (general scrub) 51482D
Clarke Technology Care Kit 14607A
Hour Meter Kit 10656A
29" Squeegee Kit 18820A
32" Squeegee Kit 18821A
Polydur, Protectant 50478A
Kit, Grease Gun 55420A
Brake, Option 10635A
Pads by Case
Color 20"
Yellow (Polish) 979199
White (Polish) 976067
Red, (Light Scrub) 976068
Green, (Light Scrub) 976169
Blue, (Heavy Duty Scrub) 976069
Brown, (Stripper) 976070
Black, (Stripper) 976170
MAINTENANCE
NOTE: ONLY AUTHORIZED TRAINED PERSON-
NEL DO THE FOLLOWING:
How to replace float switch, check ballast tanks,
and vacuum motor. (See Figure 13)
1. Remove the power cord from wall outlet.
2. Open the recovery tank/solution fill lid.
3. Using a Phillips screw driver, remove the retainer
and the screw.
4. Perform the maintenance required.
5. Close recovery tank and reinstall latch and screw.
Figure 13
CLARKE TECHNOLOGY Operator's Manual -Encore S20E Page -21-