Owner`s manual

21
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
MITRE GAUGE
1. Insert the guide bar into one end
of the groove on the table.
2. Loosen the handle by twisting it
counterclockwise.
3. Rotate the fence until the arrow
points to the angle you want.
4. Retighten the handle.
CUTTING DEPTH
Turn the hand crank to set the blade
to the required cutting depth.
• Turn anti-clockwise larger
cutting depth.
• Turn clockwise smaller cutting
depth.
SETTING THE BLADE ANGLE
1. Release the fixing handle.
2. Move the handle until the saw
blade is at the desired angle.
3. Lock the fixing handle again in the
required angle position.