Owner`s manual

11
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ASSEMBLY
• Unpack and check for damage which may have occurred in transit.
• Place the saw on a flat and firm surface.
FITTING THE WHEELS
1. Attach the wheel assembly to the
stand using the 4 hexagon bolts as
shown.
• The wheels should be attached
to the opposite side to the
handle.
FITTING THE EXTRACTOR ADAPTOR
1. Fasten the extractor adapter with
the 4 screws to the back of the
saw.
2. Fasten the extractor hose to the
extractor adapter.
FITTING THE SIDE EXTENSIONS
1. Slide 3 coach bolts into the
channel on the edge of the right
extension table as shown.
NOTE: The right extension table has a
black clip in the top right
corner.