Specifications

9
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ADJUSTING THE SANDING BELT TRACKING
1. Switch the tool on.
2. Turn the belt tracking knob as
required until the sanding belt runs
straight along the length of the
arm.
FITTING AND REMOVING THE DUST BAG
FITTING
1. Fit the dust bag over the dust
extraction outlet.
REMOVING / EMPTYING THE DUSTBAG
The dustbag should be emptied
when full.
1. Pull the dustbag off of the tool.
2. Hold the dustbag over a bin and
unzip the dustbag to empty the
contents.
3. Zip up the dustbag and slide it back on to the tool, making sure that it is
securely located.
WARNING: ALWAYS REMOVE THE DUSTBAG WHEN USING THE TOOL ON
METAL WORKPIECES.
CPF13 Electric Power File.fm Page 9 Wednesday, February 29, 2012 10:50 AM