Specifications

11
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ADJUSTING THE ANGLE
To adjust the angle of the arm.
1. Loosen the arm adjustment lever.
2. Adjust the arm to one of the 14
positions from +30
o
to -90
o.
3. Move the arm adjustment lever to
the lock position.
HINTS FOR OPTIMUM USE
• Always hold the tool securely.
• Do not exert too much pressure on the tool.
• Regularly check the condition of the sanding belt and replace when
necessary.
• On very uneven surfaces, or when removing layers of paint, start with a
coarse grit. On other surfaces, start with a medium grit. In both cases,
gradually change to a fine grit for a smooth finish.
ACCESSORIES
The following belts are available from your Clarke dealer.
DESCRIPTION PART NUMBER
Pack of 5 120 Grit (fine) belts 6502360
Pack of 5 80 Grit (medium) belts 6502365
Pack of 5 60 Grit (coarse) belts 6502370
CPF13 Electric Power File.fm Page 11 Wednesday, February 29, 2012 10:50 AM