User guide

6
Fig 2
Fig 3
3. Sit the stove upright and attach
the flue adaptor as shown in Fig
2 using the screws supplied.
Ensure the fireproof gasket is
correctly seated in the base of
the flue adaptor.
4. Check that the blanking plate is
installed in the rear panel of the
stove when the normal flue exit is
required.
• If the rear mounting flue
configuration is to be used, the
blanking plate will be fitted to the
top of the stove and the flue
connector to the rear panel.
5. Set the grate and ashpan in
position as shown in Fig 3. A
handle is supplied for when the
stove is in use.
6. Place stove in the desired
location as shown in
POSITIONING AND
INSTALLATION. Take care not to
damage the floor surface.