User guide

5
UNPACKING & ASSEMBLY
UNPACKING
Before assembling, please check contents against the following list and
advise your dealer immediately if any parts are missing. Refer also to parts list
& diagram on pages 24 & 25.
1 x Stove body
4 x Legs
1 x Flue Blanking Plate
1 x Ash-pan & Handle
1 x Flue Connection c/w Fireproof Gasket
1 x Deflector Plate
1 x Grate
1 x Fixings Kit
TOOLS REQUIRED
Phillips screwdriver
13mm spanner
Clarke Fire Cement
A full range of flue pipes and fire cement is available from your Clarke dealer.
WARNING: DUE TO THE WEIGHT OF THE STOVE IT IS RECOMMENDED
THAT TWO PEOPLE PERFORM THE UNPACKING AND ASSEMBLY.
Unpack the stove and remove
packing materials. Open the doors
and remove the grate, ashpan, legs,
blanking plate, flue adaptor and
fixings kit from inside the stove.
1. Place the stove on a soft surface
such as the polystyrene packing
materials from the crate and tilt
the stove back.
2. Attach the legs using the bolts and
washers supplied as shown in Fig 1.
FIG 1