Specifications

13
Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]
Please note that the details and specifications contained herein, are correct
at the time of going to print. However, CLARKE International reserve the right
to change specifications at any time without prior notice.
metI noitacificepS
thgieWgk82.3
)HxWxL(snoisnemiDmm031x08x805
egatloVzH05/V032
gnitaResuFA31
rewoProtoMW058
epyTlortn
oCdeepSelbairaV
deepSdaol-oNnim/sekorts0003-008
ekortSfohtgneLmm42
yticapaCgnittuCxaM mm02:muinimulA,01:leet
SdliM,012:dooW
leveLerusserpdnuoSApLBd88
leveLrewoPdnuoSdeetnarauGAWLBd99
noitarbiVs/m41
2
rotcaFytniatrecnUs/m5.1
2
GENERAL MAINTENANCE
1. Check the power cable to ensure it is sound and free from cracks, bare
wires etc. Avoid using solvents when cleaning plastic parts, most plastics
are susceptible to damage from the various types of commercial solvents.
2. Ensure all nuts, bolts and screws remain tight at all times.
• All bearings etc, in this power tool are lubricated with a sufficient
amount of high grade lubricant for the tools lifetime under normal
operating conditions, therefore no further lubrication is required.
• Only use the replacement blades specified for this product (consult
your CLARKE dealer).
• Refer to your CLARKE dealer if internal maintenance is required.
SPECIFICATION