Operating instructions

9
In the case of model 2225220, connect the mains lead to a suitable 110V
(50Hz) electrical supply through an approved plug or suitably fused isolator
switch. If using a portable 110V transformer, make sure it has a rated capacity
sufficient to take the load of the compressor.
If in doubt, consult a qualified electrician. DO NOT attempt repairs yourself.
SAFETY SYMBOLS
The following safety symbols are present on the machine:
THIS COMPRESSOR SHOULD ALWAYS BE STARTED OR STOPPED BY MEANS
OF THE START/STOP BUTTON LOCATED ON THE CONTROL BOX. THIS
REDUCES THE RISK OF ACCIDENTAL START-UP.
THIS COMPRESSOR SHOULD NEVER BE STOPPED SUDDENLY BY
UNPLUGGING FROM THE MAINS SUPPLY. THIS INCREASES THE RISK OF
ACCIDENTAL START-UP. NEVER ABUSE THE POWER CABLE
RISK OF ELECTRIC SHOCK. THE COMPRESSOR MUST BE DISCONNECTED
FROM THE MAINS SUPPLY BEFORE REMOVING ANY COVERS. DO NOT
USE IN A DAMP ENVIRONMENT.
RISK OF ACCIDENTAL START-UP. THE COMPRESSOR COULD START
AUTOMATICALLY IN THE EVENT OF A POWER CUT AND SUBSEQUENT
RESET. DO NOT CARRY THE COMPRESSOR WHILE IT IS CONNECTED TO
THE POWER SOURCE, OR WHEN THE TANK IS FILLED WITH COMPRESSED
AIR.
THIS COMPRESSOR INCORPORATES SURFACES WHICH MAY REACH A
HIGH TEMPERATURE DURING OPERATION. NEVER OPERATE WITH THE
MOTOR COVER REMOVED.
THIS COMPRESSOR MAY PRODUCE A HIGH SOUND LEVEL DURING
OPERATION. EAR PROTECTION SHOULD BE WORN.
READ THIS MANUAL BEFORE USE.