Operating instructions

SERVICING & STORAGE

1. TURN OFF THE COMPRESSOR WHEN NOT IN USE: When not in use, turn off by

depressing the On/Off switch, then remove the plug from the mains

supply. Slowly undo the drain valve to release the pressure from the

reservoir. Close the drain valve before storage and ensure it is fully

tightened before use.

2. MOVING THE COMPRESSOR: Always transport the compressor by lifting it by

the handle.

3. CLEANLINESS AND CONDITION OF THE COMPRESSOR: Keep the external

surfaces of the reservoir clean. Avoid impact damage and do not allow

the reservoir to come into contact with abrasive or corrosive materials.

4. DO NOT WIPE THE PLASTIC PARTS WITH SOLVENT: Do not use solvents or

thinners such as petrol, benzene, carbon tetrachloride or alcohol to clean

the compressor, as these chemicals will damage the finish. With the

compressor unplugged from the supply, use a dry cloth to wipe over the

plastic casing.

5. STORE THE COMPRESSOR PROPERLY: When not in use the compressor

should be stored in a secure, dry place, out of the reach of children.

Always lock the storage area. DO NOT leave it exposed to the elements

and avoid direct sunlight, direct heat, rain/moisture etc.

6. ONLY USE PARTS AND ACCESSORIES RECOMMENDED IN THIS MANUAL: The

use of unauthorised accessories or attachments is not permitted and may

result in personal injury or damage to the compressor. Do not attempt to

repair or modify the compressor.