Operating instructions

17
2. Replace the drain plug and re-fill with
fresh oil up to the MAX level on the
dipstick using Clarke SAE40 compressor
oil.
CAUTION: PROLONGED EXPOSURE
TO USED OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS
THOROUGHLY AFTER HANDLING
USED OIL.
RECOMMENDED OILS
Any compressor oil can be used which is
suitable for use at room temperatures from
+5
O
C to +40
O
C.
Clarke SAE40 Compressor Oil (1 litre) is available from your Clarke dealer (part
no 3050810). See the Clarke catalogue for other consumables.
ENVIRONMENTAL PROTECTION
One of the most damaging sources of environmental pollution is oil. Do not
throw away used oil with domestic refuse or flush down a sink or drain. Collect
old oil in a leakproof container and take it to your local waste disposal site.
EVERY 2 YEARS
Check the non-return valve shown
in Fig 10, and if necessary, replace
the gasket (O-ring) in Fig 11.
IMPORTANT: The use of parts other
than Clarke replacement parts may
result in safely hazards, decreased
tool performance and will invalidate
your warranty.
Your Clarke compressor has been
designed to give long and trouble
free service. If, however, having
followed the instructions in this
booklet carefully, you encounter
problems, take the unit to your local
Clarke dealer.
Fig 11
Fig 10
Fig 9