Specifications

11
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
OPERATION & USE
CORRECT HAND POSITION
For your own safety, always hold the
circular saw as shown in this picture,
with one hand on the main handle
and the other on the auxiliary handle.
SWITCHING ON/OFF
The on/off trigger is fitted with a safety button which prevents the circular saw
from being started accidentally. To start the saw:
1. Press and hold the safety button.
2. Squeeze the on/off trigger at the
same time.
3. Release the on/off trigger to stop
the saw.
4. The blade will continue to rotate
for several seconds after the
trigger has been released.
GUIDING THE CIRCULAR SAW
To achieve optimal results:
• Clamp the workpiece upside
down to minimise breakout.
• Follow the line drawn on the
workpiece using the 90
o
mark.
• If cutting a bevel angle of 45
o
,
follow the line drawn on the
workpiece using the 45
o
mark.
CCS185 Circular Saw.fm Page 11 Monday, December 12, 2011 3:39 PM