Specifications

8
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INSERTING THE BATTERY
1. Align the battery with the base of the
handle and slide it into the locating
clip.
• Make sure that the battery pack is
fully located and clicks into place.
BEFORE USE
FITTING DISCS & GRINDING STONES TO THE MANDREL
Mount the selected disc on to the
mandrel as shown, ensuring the two
washers are in place.
• DO NOT overtighten the screw.
ASSEMBLING POLISHING CLOTH WHEELS
Screw the cloth wheel on to the mandrel
firmly, but do not overtighten it.
ASSEMBLING SANDING BANDS
Slacken the screw on the end of the
mandrel and slide the appropriate
abrasive band on to the rubber former,
fully.
• Tighten the screw to secure the
band to the former.