Specifications

Thank you for purchasing this CLARKE Water Pump, which is a general purpose

pump, suitable for a variety of applications involving the transfer of clean, cold

water ONLY (up to a maximum of 35

C) - for domestic and gardening applications.

This manual covers a range of pumps as shown on the front cover. Please read it

thoroughly and ensure you are familiar with all aspects relating to your particular

pump, before its’ connection and use. This will ensure the safe and proper

installation of the pump, and assist it in providing a long, trouble free performance.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered

with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase. No product can be

returned to us without prior permission. This guarantee does not effect your

statutory rights.

SAFETY PRECAUTIONS

1. Ensure the pump is installed in a horizontal position with the outlet facing

vertically upwards, and except for the portable Handy Pump, it should be

firmly anchored via its fixing screws.

2. Ensure there is an adequate air flow around the pump. DO NOT mount it in an

enclosed atmosphere.

3. Ensure all water pipes - supply or discharge - are adequately supported

where necessary, so as not to put a strain on the pump connections.

4. DO NOT allow the pump to run dry, as this will cause serious damage to the

pump seals.

5. Ensure the inlet to the pump is completely unrestricted.

6. Ensure the pump is protected from the elements, neither the motor nor the

electrical terminal box is intended to be waterproof.

7. Ensure that all pipes are protected against damage where necessary, and

that they are suitably lagged to avoid the possibility of freezing during cold

weather.