Specifications

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE Air Hammer. The CAT29B and CAT95
differ only by virtue of the CAT95 having a polished metal casing as opposed
to a painted finish.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect your
statutory rights.
SPECIFICATIONS
Please note that the details and specifications contained herein are correct at
the time of going to print. However CLARKE International reserve the right to
change specifications at any time without prior notice.
Maximum Operating Pressure 90 psi (6.2 bar)
Nominal Air Consumption 4 cfm
Max Blows per Min. 3000
Air Inlet Size 1/4” BSP thread
Vibration Levels
4 m/s
2
Sound pressure level 101 dB A
Sound power level 111 dB LWA
Dimensions (L x W x H) 190 x170 x 50 mm
Weight 2.5 kg