Specifications

7
OPERATING INSTRUCTIONS
WARNING!
WAIT UNTIL THE ANVIL HAS STOPPED ROTATING BEFORE OPERATING THE
DIRECTION CONTROL SWITCH.
USING THE DIRECTIONAL CONTROL BUTTON
The direction control button should be used as follows.
1 For normal tightening, the impact wrench should be operated in the forward (F)
direction.
2 For loosening, the impact wrench should be operated in the reverse (R) direction.
Direction control button in
forward position
Direction control button in
reverse position
FITTING THE IMPACT SOCKET
1 Select the impact socket you require.
WARNING!
NEVER use standard sockets. These may
shatter with serious consequences. Use
ONL
Y Impact sockets.
2 Push the impact socket onto the anvil
as shown.