Installation Sheet
2
Owner’s Manual and Installation Guide
Thank you for choosing a Clarke Products bath. You have purchased the best-built freestanding
solid surface/acrylic bathtubs made in America. We know it will give you many years of pleasure.
The instructions in this booklet will provide you with the information you need to install and
operate this unit. This information is also available online at
www.clarkeproducts.com. Our
customer service department is available to answer any additional questions you may have
relating to the installation and operation of your bath. Call 817-796-5186 to speak to our
Customer Service representative. Please have your model number and other information
available when calling.
Important Safety Instructions
Warning: When using this product, basic precautions should be followed
as noted below:
This manual contains information and instructions for proper operation and maintenance of your
Clarke bathtub. Failure to follow these instructions could result in personal injury or electric
shock.
Read and Follow All Instructions
Instructions Regarding Risk of Fire, Shock, or Personal Injury
Do not permit children to use this unit unless they are closely supervised by an adult at all
times. Supervision should also be provided when the bath is used by an elderly or
handicapped individual.
Use this unit only for its intended us as described in this manual. Do not use attachments
not authorized by the manufacturer.
The water in a solid surface/acrylic bath should never exceed 38˚C (100˚F). Water
temperatures up to 38˚C (100˚F) are considered to be safe for a healthy adult. Use time at
these higher temperatures should be limited to approximately 15 minutes. Lower water
temperatures are recommended for extended use (exceeding 15 minutes) and for young
children. Longer exposures may result in hyperthermia, which can be fatal. The symptoms
of this condition are nausea, dizziness, and fainting.