Operating instructions

17
OPERAOPERA
OPERAOPERA
OPERA
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONS
Switching the air compressor OFFSwitching the air compressor OFF
Switching the air compressor OFFSwitching the air compressor OFF
Switching the air compressor OFF
To switch the air compressor off,
1. Close the outlet tap and press down on the on/off button (red button)
located on top of the air compressor.
2. Switch off the mains supply and remove the plug.
• You should never leave the compressor air reservoir unattended while
under pressure.
• Always release the pressure from the reservoir when not in use or prior
to storage, as described in 'Draining the reservoir' on page 18.
RR
RR
R
emoving a tool from the air hoseemoving a tool from the air hose
emoving a tool from the air hoseemoving a tool from the air hose
emoving a tool from the air hose
WW
WW
W
ARNING!ARNING!
ARNING!ARNING!
ARNING!
Always set the prAlways set the pr
Always set the prAlways set the pr
Always set the pr
essuressur
essuressur
essur
e re r
e re r
e r
egulator to zeregulator to zer
egulator to zeregulator to zer
egulator to zer
o beforo befor
o beforo befor
o befor
e attempting to re attempting to r
e attempting to re attempting to r
e attempting to r
emove oremove or
emove oremove or
emove or
rr
rr
r
eplace a tool.eplace a tool.
eplace a tool.eplace a tool.
eplace a tool.
1 Stop the power supply by pressing down on the on/off button (red button)
located on top of the air compressor.
22
22
2
Close the air outlet tap and trigger the equipment (spraygun, air tool etc),Close the air outlet tap and trigger the equipment (spraygun, air tool etc),
Close the air outlet tap and trigger the equipment (spraygun, air tool etc),Close the air outlet tap and trigger the equipment (spraygun, air tool etc),
Close the air outlet tap and trigger the equipment (spraygun, air tool etc),
to release air from the air hose to release air from the air hose
to release air from the air hose to release air from the air hose
to release air from the air hose
BEFOREBEFORE
BEFOREBEFORE
BEFORE
disconnecting the hose from the disconnecting the hose from the
disconnecting the hose from the disconnecting the hose from the
disconnecting the hose from the
machine.machine.
machine.machine.
machine.
Reset buttonReset button
Reset buttonReset button
Reset button
This compressor is equipped with a thermal
overload device, which operates as a
safety device to protect the motor.
When the motor overheats for any reason,
the overload cutout automatically cuts the
power thereby preventing damage to the
motor.
Wait around 5 minutes for the motor to cool
and press the reset button. See figure 10.
If you restart the compressor and the
overload cutout activates again, switch off
the compressor, remove the plug from the
mains and have your compressor checked by a qualified service agent.
Figure 10