Specifications

Procedure For Engine Starting.

1. Check that the CHARGE/BOOST START switch (2) is in the OFF (O) position.

2. Connect the appropriate output conductor to the unearthed battery

terminal.

3. Connect the other output conductor to the chassis, or engine bolt, away

from the battery and fuel line

4. Switch on the mains supply.

5. With the keys ready in the car’s ignition, get an assistant to switch the

CHARGE/BOOST START switch (2) to the BOOST START position and

IMMEDIATELY turn the key to start the engine

IMPORTANT:

You must switch the charge/boost start switch (2) back to the OFF (O)

position after a maximum of 3 seconds on boost start - wait 30 seconds

before repeating. Failure to do this may damage your battery and the

Start and Charge unit and may invalidate your guarantee.

With the Start and Charge unit connected to your car, never leave the

unit switched to boost start for more than 3 seconds.

Fig.1