Specifications

Specifications
Model No ................................................................. CBG 6SB
Part No ..................................................................... 6500032
Overall Dimensions ................................................. 340(H) x 340(W) x 300(D)
Gross Weight ........................................................... 9,8 Kg
Net Weight .............................................................. 8.9kg
Motor ........................................................................ 230 Volts AC 50Hz 1Phase
Power Rating ........................................................... 240 Watts
Duty Cycle ............................................................... 2min ON, 2min OFF
Grinder
No Load Wheel Speed ........................................... 2800 RPM
Wheel Diameter ...................................................... 150mm
Wheel Width ............................................................ 20mm
Bore .......................................................................... 13 mm
Sanding Belt
No Load Belt speed ................................................ 15.5 M/s
Belt Length ............................................................... 686 mm
Belt Width ................................................................. 50mm
Accessories
- 13 -
Description Part No.
Grinding Wheel - Fine 6501135
Grinding Wheel - Medium 6501089
Grinding Wheel - Course 6501088
Grinding Wheel Dressing Tool - Model No. GWD 1. 6501120
Sanding Belts1 - Fine (Pack of 5) 6502115
Sanding Belts1 - Medium (Pack of 5) 6502120
Sanding Belts1 - Course (Pack of 5) 6502125
Bench Grinder Stand 6501140
General Safety Precautions : For Power Tools
WARNING! Read these safety instructions before using the equipment.
Keep Children away when using Power Tools.
Eye Protection manufactured to the current European Safety Standards
should be worn when using Power Tools.
Always check for damage before using the tool. Any damaged part should be checked
to ensure that it will operate properly and perform its intended function.
Check for alignment of moving parts, breakage of parts, mountings and any other
condition that may affect the tools’ operation. Any damage should be properly
repaired or the part replaced. If in doubt, Do Not use the tool. Consult your local dealer.
Always ensure that adequate lighting is available. A minimum intensity of 300 lux
should be provided. Ensure that lighting is placed so that you will not be working in
your own shadow.
Always wear safety goggles manufactured to the latest European Safety Standards,
everyday eyeglasses do not have impact resistant lenses, they are NOT safety glasses.
Always use a face or dust mask if operation is particularly dusty.
Always disconnect the tool from the power supply before servicing and when
changing accessories.
Always use in a suitable environment. Don’t use power tools in damp or wet locations
or expose them to rain. Keep your work area well illuminated. Do Not use in explosive
atmosphere (around paint, flammable liquids etc.).
Always keep work area clean and clear. Cluttered areas and benches invite accidents.
Always wear proper apparel. Loose clothing or jewellery may get caught in moving
parts. Wear protective hair covering to contain long hair.
Always handle equipment with care. Do Not carry the tool by its’ electric cable, or
yank the cable to disconnect it from the power supply.
Always ensure the switch is OFF before plugging in to mains. This will ensure the
equipment does not start accidentally.
Always follow the maintenance instructions. Keep tools clean and maintained for the
best and safest performance.
Never force the tool. It will do a better and safer job at the rate for which it was
designed.
Never operate equipment whilst under the influence of drugs, alcohol or any
medication.
- 4 -
✔
✗