Specifications

UNPACKING & PARTS IDENTIFICATION

Unpack and lay out the components, checking against the following list. Any

damage or deficiency should be reported to your CLARKE dealer immediately.

Some components are stored within the side compartment. To open the

compartment, slide the recessed handle backwards.

1. Welder complete with power cable and gas hose.

2. 2xWheels

3. 2x Casters

4. 1xTubular axle

5. 1xHandle

6. 1x Welding Mask

7. 1xWelding Mask handle

8. 1xPackage containing 1x Clear Glass and 1x Dark Glass Lens

9. 1xPackage containing 6 screws and nuts for welding mask

10. 1xGas Regulator with nut and tail connector.

11. 1xPackage containing:

a. 2xcirclips for wheel axle (wheel retainers)

b. 2xHex. socket head screws for securing the handle.

c. Worm drive hose clip for gas hose to regulator

d. 3xspare welding tips...0.6mm, 0.8mm and 1.0mm

NOTE: A 0.6mm tip is also fitted to the torch

12. Torch & Hose assembly

13. Earth Lead Assembly

Fig.1

WIRING DIAGRAMS