User manual

ons to the proper position.
Press the Store key for 2 seconds: the LED will flash and show
”C--_ _” and “STORE” alternately.
Press number keys to choose the position you want to store (1-99), then press the OK
key to confirm the store operation.
4. Repeat steps 1 through 3 to set up as many satellite positions as you want.
Naming the satellite positions:
Sixty satellite names are already stored in the VBOX for your designation. Also, you
can give names (6-letter maximum) to your favorite satellite positions.
Choosing pre-stored names for satellite positions
1. Move the actuator or H-H mount with the 3
33
34
44
4buttons to the right position.
2. Press the name button for 2 seconds. The LED will flash the pre-stored
satellite name that is built into the VBOX.
3. Press the  or 

 to choose the favorite name for satellite positions.
4. Press OK key to confirm; the name you choose will flash three times, then the
assigned position will show the name.
Input any name you like, up to 6 letters
1. Move the actuator or H-H mount with the 3
33
34
44
4buttons to the right position.
2. Press the name button for 2 seconds; the LED will flash the pre-stored satellite
name that is built into the VBOX.
3. Press the  keys and choose “__ __ __ __ __ __”. After 2 seconds, the
leftmost side of “__” will flash. You can move the cursor by pressing the 3
33
3 4
44
4
Move the actuator or H-H mount with the 3MANUAL4butt
3
4
Imported and distributed by satmedia GmbH Germany www.satmedia.com
Store the Satellite Positions:
C - _ _
S T O R E
C - 0 1
P - 0 1