Operation Manual

Nr. Item Function

1 LED Power

Indicates the power status.

Yellow: device out ,power adapter connected

Orange: device on , power adapter connected

Red: device on , power adapter not connected

2 LED Lock This light will be on when signal is locked.

3-11 LED 13V / 18V / 22kHz Indicate the 22K/13V/18V

4 Key [F1] [F2] [F3] [F4] Made of 4 keys, F1 -- F4

5 Key [System] To set all system parameters.

6 Key [Scan] Go to auto scan menu and scan channels

7 Key [Angle]

Go to the AZ , EL and Polarity calculation

8 Charge port To connect with the charger cord.

9 IF signal input Satellite signal input port,

10 Display

Screen shows MENU and Programs clearly

11-3 LED 13V / 18V / 22kHz Indicate the 22K/13V/18V

12 Key [Power]

To turn the meter on/off， press and hold for 2

seconds to power on the meter.

13 Key Navigations and [OK]

Use the Arrow key to select the right item, OK

key to confirm.

14 Key [Menu] To enter the main menu

15 Key [Exit]

To exit from the present menu and move to the

16 Key [Find]

Go to the easy satellite find menu, can set and

align a

satellite dish quickly.

17 USB Port Connect USB storage device to upgrade

Start of operation

Battery

Before the first operation with the measuring device charge the battery

completely.

Load the accumulator during the first loading procedure at least 5hours.

The maximum battery charging time is approximately 12 hours.