Contents 2. Safety/Precautions ............................................................................................... 4 2.1 Safety 2.2 Precautions 3. Points to Check before Use ................................................................................. 6 3.1 Accessories 4. Controls/Functions .............................................................................................. 7 4.1 Front Panel 4.2 Rear Panel 4.3 Remote controller 4.4 Front Display 5. How to Connect .................
1.2 Main Features Introduction This satellite receiver is designed for the reception of free-to-air and encrypted channels. Depending on your location, enjoy the rich choice of up to 10,000 different channels broadcasting a large range of programs: culture, sports, cinema, news, events, etc. This receiver is assembled with highly qualified electronic parts. 1.2 Main Features ᶀ High-Definition Personal Video Recorder (HD PVR) ᶀ Compliant MPEG-II/ MPEG-IV/ H.264.
2.2 Precautions Safety/Precautions 2.1 Safety Be sure to read this user's manual before starting the operation of the unit. Do not touch the power cord with wet hands as it may cause electric shock. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. Place the unit in a well ventilated and no-heat environment. When you do not use this unit for a long time, make sure that power cord is pulled out from the outlet.
Controls/Functions 3.1 Accessories 4.1 Front Panel English Points to Check before Use The accessories below are included with this receiver: 1 Remote control : 1 User's manual : 1 er's Us 5 al nu ma 2 Batteries (AAA type) : 2 3 4 6 7 HDMI cable : 1 1 Standby/Power on Indications Lamp : Flashes red light in “Standby” mode and shows no light in “Power ON” mode. 2 Power : Switches the receiver between “Standby” and “Power ON” modes.
4.2 Rear Panel 4.3 Remote controller 5 7 11 10 13 14 1 POWER : To turn the receiver On/Off. 2 STAND BY : Just turn the receiver off. 3 TEXT : To show the teletext contents if 1 3 4 2 3 4 6 8 9 12 15 Connector Function 1 LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner 2 LNB OUTPUT IEC 169-24 FEMALE IF loop-through output from digital tuner 3 S/PDIF Fiber Optic Digital audio output (Optical) 4 USB USB A-type USB 2.
4.3 Remote controller How to Connect volume level in non-menu mode. When Connecting the Receiver to a TV with RF connectors 20 OK : To show the Channel List in non- menu mode and select an item or confirm in menu mode. 21 - 22 Vol Up & Down : To change the volume level in non-menu mode.
6.1 Getting Started Operation 3) Antenna Setup ⊺ Use 6.1 Getting Started / and / to move in the menu. ⊻ Press on ‘Dish Setting’. The following window will appear. If you have a motorized dish, press on ‘Motorized Setting’. After your receiver is powered on, proceed with installation as follows : ҫ Note : Enter a 4-Digit password if need arise. The default password is ‘0000’. 1) Menu Language Setting ⊹ Turn on your TV and receiver.
6.1 Getting Started 6.1 Getting Started (When the DiSEqC Motor parameter is set as 1.2) 4) Satellite Scan - Move Fine : Move the dish position 1 step at a time to west/east by pressing buttons. - Motor Control : Control motor by / press button on the remote. ҮRecalcuate : Recalculate the position of all other saved satellites relative to the known position. ҮReset System : Reset the position of all saved satellites. ҮDisable Limit : Disable east and west limit.
6.1 Getting Started 6.1 Getting Started ᶀ Blind Scan ⊺ Press / to set the “TP” and “Pol” and “Mode” options. - TP : Select TP frequency - Pol : Select Vertical / Horizontal / All. - Mode : All / Free / TV ҮAll : To search all the Free To Air and scrambled channels, TV & Radio channels. ҮFree : To search Free To Air channels only. ҮTV : To search TV channels only. ⊻ SCAN : Begin channel search of the selected satellites. ᶀ Manual Scan ⊹ Select a transponder.
6.1 Getting Started 6.1 Getting Started 6) Channel Selection 7) Other Functions of the Remote Control / to navigate between channels until you find the channel you ᶀ Volume Control ⊹ While watching a program, press ᶀ If you know the channel number, you can enter it with the NUMERIC buttons and wait 2 seconds until the channel is changed. ᶀ If you know the channel name or transponder or CAS, you can press channel list or to control the volume.
6.1 Getting Started 6.1 Getting Started ᶀ Multi Picture Display ᶀ SUBTITLE You can press to select the subtitle language of current channel. ᶀ SLEEP You can set the your receiver to turn off after a few minutes. Press timer. - To cancel the sleep timer, please press (Disable, 10, 20, 30, 60, 100, 120 Minutes) to set the sleep until you set time as “0 min”. ᶀ ZOOM You can press to zoom in the video.
6.1 Getting Started 6.2 System Setting ᶀ Informaion bar 1) Time Settings - GMT Usage : Set this ON for the local time to be determined by adjusting the time difference with the GMT (Greenwich Meantime) according to your location. - Current Date : If GMT Usage is OFF, you can modify the date by pressing . - Current Time : If GMT Usage is OFF, you can modify the time using the NUMERIC buttons. - Summer Time : Select the period during which Summer Time is in force.
6.2 System Setting 6.2 System Setting 2) A/V Output Settings 3) OSD Settings - Audio Language : Set the default audio language when selecting a channel. This submenu allows you to set the menu language, OSD transparency and Information and Volume timeouts. - Subtitle Language : Set the default subtitle language. - Menu Language : Select the desired language for the menu. - TV Type : Select the TV type. - Transparency : Set the OSD transparency of the menu.
6.2 System Setting 6.2 System Setting 5) Security Settings 6) Database Reset This submenu allows you to restore the factory set values (useful when encountering problems after changing settings). - Receiver Lock : Set ON to require entering a PIN code at powering on. - Delete Radio Channels : Erase all radio channels in the database. - Install Lock : Set ON to require entering a PIN code to access the installation menu.
6.2 System Setting 6.3 Channels 7) IP Setting 1) Set Favorites This submenu allows you to set up favorite groups of channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. The receiver supports 16 favorite groups. ⊹ Press on ‘Set Favorites’. The list of groups will be displayed. ⊺ Press and to choose a group. The following menu will be displayed. / If you want to change the name of a favorite group, press the RED button.
6.3 Channels 6.3 Channels 2) Edit Channels 3) Move Channels ⊹ Press on ‘Edit Channels’. The following menu will be displayed. This submenu allows you to move channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. ⊺ Press on the channel that you want to edit. ⊹ Press on ‘Move Channels’. The following menu will be displayed.
6.3 Channels 6.3 Channels 4) Lock Channels 5) Skip Channels This submenu allows you to skip channels. Once a channel is set to be skipped, it will be whenever you navigate channels using / in non-menu mode. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. ҫ If you set ‘Lock Channel Confirm’ (refer to <6.
6.3 Channels 6.4 Electronic Program Guide 6) Delete Channels 1) EPG ҫ Note : Be careful! If you delete a channel, you will not be able to access it again until you rescan. ⊹ Press on ‘Delete Channels’. The following menu will be displayed. ⊺ Press on the channel that you want to set/unset for deletion; the delete icon will be displayed/removed. ⊻ Press the INFO button to delete all channels in the current list; you will be asked to enter your password.
6.4 Electronic Program Guide 6.5 Games 1) Tetris on ‘Tetris’. The following menu will be displayed. ⊺ You can choose a skill level using / . ⊻ Press to start the game , or press the EXIT button to return to the previous menu. ⊼ Press ⊽ Press ⊾ Press to rotate a block. / to move a block. to drop a block. ⊿ You can see the next block in the top-right small window. ⋀ Press the EXIT button to quit the game.
6.5 Games 6.5 Games 2) Sokoban 3) Snake ⊹ Press on ‘Sokoban’. The following menu will be displayed. ⊺ You can choose a skill level using / . ⊹ Press on ‘Snake’. The following menu will be displayed. ⊺ You can choose a skill level using / . ⊻ Press to start the game , or press the EXIT button to return to the previous menu. ⊼ Press / / / to move. ⊻ Press to start the game , or press the EXIT button to return to the previous menu.
6.6 Storage This submenu allows you to play various MP3 files, view JPG files or download a new software by connecting your USB flash drive. 2) JPG menu ͈ Press ͉ Press 1) MP3 menu ͈ Select the MP3 file you want to play back by using / , in the file list. ͉ Press the EXIT button to hide the file list. You can then select an option using . ͊ You can then change the volume by pressing / / , / to select a picture.
6.6 Storage 6.6 Storage 4) Disk Manager 5) File manager ͈ Press YELLOW button for connect PC. - Disk Information : Choose the Hard disk volume or usb device with USB hub. You can view a information of usb devices (used size, total size, free size) ͉ Press button after input IP address of PC. ͊ Press button after choose target. - Chek Disk : Choose the Hard disk volume or usb device with USB hub. You can check the usb devices. ҫNote : Have to run PC tool before connect PC.
6.7 System Information 6.8 Common Interface English You can check the current information about your receiver such as receiver model name, S/W (software) version, H/W (hardware) version, manufacturing date, etc. ҫ Note : This information is useful to download new software and/or repair the receiver. 2) The Status of the CAM ⊹ You can access detailed information about the CAM using the Main Menu to select ‘CI’ and pressing .
6.9 Conditional Access System 6.9 Conditional Access System 1) Card Initializing 2) The Status of the Smart Card ҫ Note : Without the Smart Card, you can watch only Free-To-Air programs. ͈ Insert the Smart Card into the receiver’s slot designed for it. ͈ You can access detailed information about the Smart Card using the in the Main Menu to select ‘CA’ and pressing .
6.10 PVR 6.10 PVR ᶀ Edit Menu 1) File List ⊹ Press to show the file list. Select the file you want to play back by using , / . ⊺ Press . In the right side of screen, detailed information about the selected file will be displayed. (Recorded Date/Time, Used size, Total Size) - To see a full screen, press appear. once more. And then the following time-bar will You will be asked to enter a password whenever you try to enter it.
6.10 PVR 6.10 PVR ᶀ RWD(Rewind) 3) Trick Mode When playing the file, you can press to adjusting the playing speed. The speed will change to x2, x4, x8 and x32. ᶀ Slow(1/2x, 1/4x) ᶀ PLAY This button will display a time- banner. If you want to show the play list while playing the file by using . When playing the file, you can press to adjusting the playing speed. ᶀ Timeshift (PAUSE in playback mode) This button will pause the playing file until you play again with 6.
6.10 PVR 6.10 PVR ᶀ Bookmark 4) Instant Recording - RED : Press this button and red small triangle cursor will be placed at that position. If you want to delete the bookmarked position, press a this button once more when red small triangle cursor appear. - GREEN : Press this button and the current position will jump to the next bookmarked position and playback starts from this point.
6.10 PVR Troubleshooting 6) Timer Recording There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does not work properly, check it according to the procedures shown in the table below: Problem 7) Time Shift ⊹ If you want to pause and resume live TV channel, press PAUSE button. The default time of Time-Shift is 30 min in your STB. No Picture or sound. ͊ The trick-mode operations are provided. If you want to jump to live channel, please press .
Specifications NEC-IR System capabilities Fully DVB compliant Operating condition up to 7 Meter USB USB Supply(Rear) DC 5V Max 500mA Power supply Power consumption max 30W satellite Connector IEC 169-24, female LNB/Tuner input Frequency range 950MHz ~ 2150MHz Supply voltage 100V ~ 250V Signal level -65dBm ~ -25dBm Supply frequency 50Hz ~ 60Hz LNB supply DC 13/18V, max 400mA Demodulator LNB switch control 22KHz DiSEqC Ver 1.0/1.1/1.