Operation Manual

88
normal mode.
3) Press [CH+] or [CH-] button. By pressing the button, the power code of next
setting number will be output. (LED blinks)
It does not answer against key input other than [OK], [0~9], [CH+], [CH-], [Power] key.
4) Press [OK] button to save and exit the setup model. (LED will blink 2 times and
off)
3.
Setup Code Read Out (Number Call)
1)
Press and hold [DEVICE] + [OK] button more than 2 seconds until the device
LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to
normal mode.
2)
Press [INFO] i button. LED will blink the number of times as setup code.
0: LED blinks quickly 10 times.
1~9: LED blinks the number of digit.
4.
Factory Reset
1)
Press and hold [TV] + [0] button simultaneously for more than 5 seconds.
2)
LED will blink in the following order of STB -> TV->DVD->AUX 3 times and turn