Operation Manual

87
In case the 3-Digit setup code is not valid, the LED will off for 1.5seconds and revert to on status for
input mode.
It does not answer against key input other than [OK], [0~9], [CH+], [CH-], [Power] key.
4)
Press [OK] button to save and exit the setup model. (LED will blink 2 times and
off)
2.2 Auto Search (CH+, CH-) Setup method
1) Turn on the device that you want to setup (for example turn on TV)
2) Press and hold [DEVICE] + [OK] button more than 2 seconds until the device
LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to
73