Operation Manual

51
On the other hand, NO is used when you do not want to set Dolby Digital audio as the default audio.
If the program you
are watching has AC3 and Stereo audio, Stereo audio is used.
4 AC3 Downmix
YES is used when you want to set the audio output to be down-mixed from AC3 to Stereo. NO is used
when you do not want to set the audio output to be down-mixed from AC3 to Stereo. If NO is on and
you
are using only HDMI or SCART connection, there can be no audio sometimes, if the program that you
are watching provides AC3 only. This option is recommended when you are using S/PDIF connection.
B. Language Selection
[ i: MENU > Setup > System > Language]
A variety of languages are available for the OSD of ET 9000 .
50