Contents English 1. Introduction 1.1 Overview 1.2 Main Features 2 2. Safety/Precautions 2.1 Safety 2.2 Precautions 3 3. Points to Check before Use 3.1 Accessories 5 4. Controls/Functions 4.1 Front Panel 4.2 Rear Panel 4.3 Remote Controller 6 5. How to Connect 10 6. Operation 6.1 Getting Started 6.2 System Setting 6.3 Channels 6.4 Electronic Program Guide 6.5 Games 6.6 USB Menu 6.7 System Information 6.8 Common Interface 6.9 Conditional Access System 6.10 PVR 11 7. Troubleshooting 46 8.
Safety/Precautions 1.1 Overview 2.1 Safety This satellite receiver is designed for the reception of free-to-air and encrypted channels. Depending on your location, enjoy the rich choice of up to 10,000 different channels broadcasting a large range of programs: culture, sports, cinema, news, events, etc. This receiver is assembled with highly qualified electronic parts. English Introduction Be sure to read this user's manual before starting the operation of the unit.
2.2 Precautions Points to Check before Use English When installing the unit 3.1 Accessories Install the unit horizontally. An uneven installation may cause the unit to be damaged. Do not put heavy items such as a TV set on the unit. That may damage the unit. The accessories below are included with this receiver: Remote control : 1 User's manual : 1 er's Us Do not leave the unit where the water drops or splashes. Do not put water holding items such as vases on the unit.
Controls/Functions 4.2 Rear Panel 3 6 7 9 8 10 English 1 4.1 Front Panel 12 2 2 4 5 No. Name 1 3 4 5 1 Power : Switches the receiver between ‘Standby’ and ‘Power ON’ modes. 2 Standby/Power on Indications Lamp : Flashes red light in ‘Standby’ mode and shows no light in ‘Power ON’ mode. 3 Indication Light : Flashes when a key on the Remote Control Unit (RCU) is pressed.
4.3 Remote controller 4.3 Remote controller 19 RECALL(RED) : To move to the previous 2 MUTE : To turn the sound On/Off. channel. Used for special functions in menu mode. 20 AUDIO(GREEN) : To show the Multilanguage audio track, the stereo-mono mode. Used for special functions in menu mode. 21 TEXT(YELLOW) : To show the teletext contents if teletext is transmitted. Used for special functions in menu mode. 22 BLUE : To display multiple pictures.
Operation When Connecting the Receiver to a TV with RF connectors 6.1 Getting Started 1 Connect the TV antenna to TV ANT IN 2 Connect the RF-IN of the TV to RF-OUT 3 When available, you may instead connect the video and audio of the TV to video and audio: Connect the red and white connectors to Audio R and Audio L, and the yellow connector to video English How to Connect After your receiver is powered on, proceed with installation as follows : 1) Menu Language Setting ͈ Turn on your TV and receiver.
6.1 Getting Started 6.1 Getting Started (When the DiSEqC Motor parameter is set as 1.2) 2) Antenna Setup - Hemisphere : Select between the Northern/Southern. ͉ Use - Move : You can move the dish to the West/East. CH / CH and VOL / VOL to move in the menu. ͊ Press on ‘Dish Setting’. The following window will appear. If you have a motorized dish, press on ‘Motorized Setting’. ҫ Note : Enter a 4-Digit password if need arise. The default password is ‘0000’.
6.1 Getting Started 6.1 Getting Started Ȟ Blind Scan 3) Satellite Scan ͈ To select more than one satellite, press the RED button when the selection bar is positioned on the satellite. on the names of the satellites that you want to scan under ‘Satellite List’. CH / CH ͊ Press VOL CH and set the ‘Search Type’ and ‘Network Search’ parameters. - Network Search : Set ON to find more transponders (frequencies) through a Network Information Table (NIT) scan.
6.1 Getting Started 6.1 Getting Started Ȟ Manual Scan 4) Channel Selection You can use CH / CH to navigate between channels until you find the channel you want. ͉ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC buttons. Ȟ If you know the channel number, you can enter it with the NUMERIC buttons and wait 2 seconds until the channel is changed.
6.1 Getting Started 6.1 Getting Started 5) Other Functions of the Remote Control ͈ While watching a program, press VOL or VOL to control the volume. ͉ You can press the MUTE button to remove the sound of the program: the mute icon will be displayed. Press the MUTE button again to turn the sound back on. You can press this key to pause the video. Press it again to resume the video. When video is paused, you can zoom in sections of it. ͈ Select a section using ͉ Press CH / to zoom in.
6.2 System Setting 6.2 System Setting 1) Time Settings 2) A/V Output Settings - GMT Usage : Set this ON for the local time to be determined by adjusting the time difference with the GMT (Greenwich Meantime) according to your location. - Current Date : If GMT Usage is OFF, you can modify the date by pressing . - Current Time : If GMT Usage is OFF, you can modify the time using the NUMERIC buttons. - Local Offset : If GMT Usage is ON, Local time is GMT time + Local Offset.
6.2 System Setting 6.2 System Setting 3) OSD Settings English This submenu allows you to set the menu language, OSD transparency and Information and Volume timeouts. - Menu Language : Select the desired language for the menu. - Transparency : Set the OSD transparency of the menu. (1% ~ 100%) - Information Timeout : Select the display duration of the information banner. (1, 2, 3, 5 or 10 seconds) - Volume Timeout : Select the display duration of the volume box.
6.2 System Setting 6.3 Channels 6) Calculator 1) Set Favorites - Use the Numerical and the ͈ Press VOL / VOL / buttons on the remote control unit. on ‘Set Favorites’. The list of groups will be displayed. ͉ Press / and to choose a group. The following menu will be displayed. If you want to change the name of a favorite group, press the RED button. CH CH ͊ Press to add (or remove if previously added) the selected channel to/from the favorite channel group.
6.3 Channels 6.3 Channels 4) Lock Channels ҫ If you set ‘Lock Channel Confirm’ (refer to <6.2>security setting) to OFF, you will not be asked to enter a password even if the channel is locked. ͈ Press on ‘Lock Channels’. The following menu will be displayed. ͉ Press on the channel that you want to lock/unlock; the lock icon will be displayed/removed. ͊ Press the EXIT button to return to the previous menu. 3) Move Channels This submenu allows you to move channels.
6.3 Channels 6.3 Channels 5) Skip Channels 6) Delete Channels CH CH ҫ Note : You can still access a ‘skipped’ channel if you enter its number using the NUMERIC buttons in non-menu mode. ͈ Press on ‘Skip Channels’. The following menu will be displayed. ͉ Press on the channel that you want to skip/un-skip; the skip icon will be displayed / removed. ͊ Press the EXIT button to return to the previous menu. This submenu allows you to delete channels.
6.4 Electronic Program Guide 6.4 Electronic Program Guide 1) EPG 2) Timer This sub menu allows you to set the on/off time of your receiver. ͈ Press the EPG button to display the guide menu. ͈ This submenu allows you to set on/off times of your receiver. To display the timer menu, press the RED button while in the guide menu. ͉ Press ͊ Press ͋ Press / VOL CH VOL / to see the previous/next guide. CH / / to select another channel.
6.5 Games 6.5 Games ͏ Press the EXIT button to quit the game. 1) Tetris on ‘Tetris’. The following menu will be displayed. ͉ You can choose a skill level using ͊ Press menu. ͍ Press CH / . CH to start the game , or press the EXIT button to return to the previous ͋ Press ͌ Press English ͈ Press to rotate a block. / VOL CH VOL to move a block. to drop a block. ͎ You can see the next block in the top-right small window.
6.6 USB Menu This submenu allows you to play various MP3 files, view JPG files or download a new software by connecting your USB flash drive. 2) JPG menu ͈ Press ͉ Press 1) MP3 menu ͈ Select the MP3 file you want to play back by using CH / CH , in the file list. ͉ Press the EXIT button to hide the file list. You can then select an option using ͊ Move to the volume control bar using / . CH VOL / VOL VOL / VOL , CH / CH English 6.
6.6 USB Menu 6.7 System Information 4) PVR Management ҫ Note : This information is useful to download new software and/or repair the receiver. - Format Disk : You can format the USB device. ҫ Note : The receiver supports FAT16 and FAT32(Recommended) of USB device, but NTFS file system doesn`t support. If USB device is formatted by NTFS, Please change file system to FAT32(Recommended) by PC. 6.8 Common Interface 1) CAM Initializing
6.8 Common Interface 6.9 Conditional Access System 1) Card Initializing ҫ Note : Without the Smart Card, you can watch only Free-To-Air programs. ͈ Insert the Smart Card into the receiver’s slot designed for it. ͉ The message ‘Smart Card Initializing’ will appear on the screen. ͊ After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch the channels offered by the service provider.
6.9 Conditional Access System 6.10 PVR 2) The Status of the Smart Card 1) File List / CH keys in the ͉ Proceed with further instructions displayed on the screen to check more detailed information depending on the Smart Card in use. ҫ Note : Further detailed information is not mentioned in this manual since the information depends on the Smart Card in use. Ȟ File Playback ͈ Press , CH button to show the file list. Select the file you want to play back by using button. CH ͉ Press button.
6.10 PVR 6.10 PVR 2) Trick Mode Ȟ JUMP button - You can locate the playing time to the desired playing time by using YELLOW button. Set desired playing time, and press button. Ȟ PLAY button - You can locate the playing time to the desired playing time by using press this key continuously, the cursor moves very quickly. - When receiver play recorded file and paused by user, if you want to continue playing your file, press or button.
6.10 PVR 6.10 PVR 3) Instant Recording 4) Timer Recording ͈ You can record a current channel by using button. After 2 seconds, full banner will be changed to small banner. Time-banner is toggled by INFO button. If you press INFO button, full time-banner will be displayed. And press INFO button, it will be disappeared, and also when you press EXIT button, and banner will be disappeared. ͉ Press button. The following picture shows that you can change recording duration.
Troubleshooting Specifications Problem Possible causes The LED light on the front The AC power cord is disconnected. panel does not light. No Picture or sound. Wrong connection of the video/audio output to the TV input terminal. Remedy System capabilities Fully DVB compliant LNB/Tuner input Connect the power cord properly into the power socket. Connect the two terminals correctly with RCA or RF cable(s). Wrong connection of the satellite antenna cable. Connect the antenna cable correctly.
Power supply Rear Panel connectors Power consumption max 25W Supply voltage 90V ~ 250V Supply frequency 50Hz ~ 60Hz TV SCART Video Out(CVBS, RGB) Audio Out Video Out(CVBS) VCR SCART Video In(CVBS, RGB) Audio Out RF modulator PAL G/I/K TV Type Physical Specification Video 1 X RCA cinch Audio L/R 2 X RCA cinch Component(Y/Pb/Pr) 3 X RCA cinch Serial data 9pin D-sub Digital tuner input IEC 169 - 24 Loop-through Digital tuner IEC 169 - 24 Terrestrial ant input IEC 169 - 2 RF modulator
