TDS

Product Submittal Sheet
Tech Support: 888-437-3244 Sales: 800-543-7140
Engineering Services: 877-832-3206 clarkdietrich.com
Quicksilver™ Corner Bead (CBS)
Hot-dipped Metal Corner Bead
Quicksilver™ corner bead is a hot-dipped,highly durable galvanized bead that offers superior
corrosion protection. This bead is ideal for humid, moisture-prone conditions and high-traffic areas
subject to more than normal abuse.
Recognized as a superior corrosion-resistant drywall finishing corner bead, Quicksilver™ corner
bead provides a high-quality finish and solid protection at drywall corners. This traditional drywall
finishing product is nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and
perforated for excellent joint compound adhesion.
Product Data & Ordering Information
Material: 0.0125" min. thickness, G30 hot-dipped galvanized steel
Dimensions: 1-1/4" leg x 1-1/4" leg
Width Length Wt./Ctn. Pcs./Ctn.
1-1/4" x 1-1/4" 6'-9" 56 lbs 75
1-1/4" x 1-1/4" 6'-10" 57 lbs 75
1-1/4" x 1-1/4" 7' 56 lbs 72
1-1/4" x 1-1/4" 8' 56 lbs 63
1-1/4" x 1-1/4" 9' 56 lbs 56
1-1/4" x 1-1/4" 10' 55 lbs 50
1-1/4" x 1-1/4" 12' 56 lbs 42
ASTM & Code Standards
• ASTM C1047
• SDS & Product Certification Information is available at www.clarkdietrich.com/SupportDocs
Storage
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a
level platform, and protected from the weather.
09.22.00 (Support for Plaster & Gypsum Board)
• Strong metal reinforcement for drywall
corners
• Exposed nose of the bead resists impact and
forms a screed for finishing
Sustainability Credits:
For more details and LEED letters contact Technical Services at 888-437-3244 or visit www.clarkdietrich.com/LEED
LEED v4 MR Credit -- Building Product Disclosure and Optimization: EPD (1 point) - Sourcing of Raw Materials (1 point) - Material Ingredients (1 point) - Construction and
Demolition Waste Management (up to 2 points) - Innovation Credit (up to 2 points).
LEED 2009 Credit MR 2 & MR 4 -- ClarkDietrich's steel products are 100% recyclable and have a national average recycled content of 34.2% (19.8% post-consumer and
14.4% pre-consumer). If seeking a higher number to meet Credit MR 5, please contact us at ([e-mail] / 888-437-3244)
Project Information Contractor Information Architect Information
Name: Name: Name:
Address: Contact: Contact:
Phone: Phone:
Fax: Fax:
Metal-CBS © 10/2018 ClarkDietrich Building Systems