Full Product Manual

The technical content of this literature is eective 2/19/19 and supersedes all previous information. The technical content of this literature is eective 2/19/19 and supersedes all previous information. Pub. No. CD-ProSTUD 2/19
clarkdietrich.com
ClarkDietrich has prepared this literature with the utmost diligence
and care for accuracy and conformance to standards.
ClarkDietrich intends this information to be accurate, informative, and
helpful as a selection guide for choosing ClarkDietrich products. However,this
information is only to be used for guidance and is not intended to replace the
design, drawings, specifications, and decisions of a professional architect or
engineer.
ClarkDietrich or its affiliates shall not be responsible for incidental or
consequential damages, directly or indirectly sustained, nor for loss caused
by application of our products for other than their intended uses. Our liability
is limited to replacement of defective products. Claims shall be deemed waived
unless they are made to us in writing within thirty (30) days of the date a
problem was or reasonably should have been discovered.
ClarkDietrich reserves the right to modify or change any information contained
in this literature without notification.
AISI S100-12 North American Specification for the Design of
Cold-Formed Steel Structural Members
AISI S220-15 North American Standard for Cold-Formed Steel
Framing—Nonstructural Members
ASTM American Society for Testing and Materials
A1003 "Material specification for steel sheet mechanical and chemical requirements"
C645 "Standard Specification for Nonstructural Steel Framing Members"
C754 "Standard Specification for Installation of Steel Framing Members to Receive
Screw-Attached Gypsum Panel Products"
C1002 "Standard Specification for Steel Self Piercing Tapping Screw for the Application
of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs"
E119 "Standard Test Methods for Fire Tests of Building Construction and Materials"
E72 "Standard Test Methods of Conducting Strength Tests of Panels for
Building Construction"
E90 "Standard Test Method for Laboratory Measurement of Airborne Sound
Transmission Loss of Building Partitions and Elements"
UL
®
Underwriters Laboratories testing standard
UL 263 "Fire Tests of Building Construction and Materials"
Independent product testing and certification
Sound ratings: (WEAL) Western Electro-Acoustic Laboratory
Fire testing: (UL) Underwriters Laboratories Inc.
Multiple UL
®
design listings for ProSTUD
Over 50 UL Designs. See UL file number R26512 for additional information.
ProSTUD
®
& ProTRAK
®
CODE APPROVALS AND PERFORMANCE STANDARDS
ClarkDietrich® ProSTUD Drywall Framing System meets or exceeds these applicable performance standards.
USGBC and related logo is a
trademark owned by the U.S. Green
Building Council and is used by
permission.
ClarkDietrich is a proud member of the Steel Framing Industry Association (SFIA).
Check the updated list of Certified Production Facilities at Intertek's website at
www.intertek.com.
Additional code approvals SFIA (Steel Framing Industry Association)
Intertek CCRR0207.
LOCATIONS
ClarkDietrich Manufacturing and Sales Locations:
CALIFORNIA Riverside
P 951.360.3500
F 951.360.3333
CALIFORNIA Sacramento
P 951.360.3500
F 951.360.3333
CONNECTICUT Bristol
P 866.921.0023
F 860.584.6899
FLORIDA Dade City
P 352.518.4400
F 352.518.4450
TEXAS Dallas
P 214.350.1716
F 214.350.7252
CLIP EXPRESS
℠
P 866.638.1908
FLORIDA Miami
P 800.648.4695
F 305.477.4108
GEORGIA McDonough
P 678.304.5500
F 678.304.5555
ILLINOIS Rochelle
P 800.659.0745
F 513.645.0750
MARYLAND Baltimore
P 410.477.4000
F 410.477.1550
MISSOURI O'Fallon
P 888.747.0220
F 636.300.0414
OHIO Warren East
P 330.372.5564
F 330.372.4055
OHIO Vienna
P 330.372.4014
F 330.372.1945
TEXAS Baytown
P 281.383.1617
F 281.573.1679
ClarkDietrich Engineering Services.
A full spectrum of solutions.
Toll-Free Phone: [phone]
Toll-Free Fax: [phone]
Technical Services: 888.437.3244
Email: [e-mail]
CENTRAL Crown Point, IN
NORTHEAST Bristol, CT
SOUTHEAST McDonough, GA
WEST Carlsbad, CA
UL
®
and UL
®
Design are service marks of Underwriters Laboratories, Inc.
For the complete listing of all Fire and Sound rated assemblies,visit
www.clarkdietrich.com/testing-agencies.
LEED
®
Services
BUILD GREEN with ClarkDietrich
ClarkDietrich is an active member of the U.S. Green Building
Council and is committed to supplying quality products that
are environmentally responsible. We are continually working
to develop greener building products and sustainable business
practices. ClarkDietrich steel framing helps contribute points
toward LEED® certification. For more details contact Technical
Services at 888-437-3244 or visit www.clarkdietrich.com/LEED.
23