Installation guide

Tactile Sound Transducers
5
www.clarksynthesis.com
One of the best materials for carrying tactile vibrations is wood.
In most applications, the TST should be centrally located on
the structure (chair, floor, riser, deck, etc.) in order to evenly
distribute the tactile effect. When two or more TSTs are used
on one structure, they should be spaced equidistant from each
other and the edges/boundaries of the structure. Mounting to a
bridge, joist, or frame member is preferred.
NOTE: The TST329 and AW339 Transducers are designed to be mounted in any
orientation. The TST239 and TST429 transducers are designed to be mounted in
a horizontal orientation ONLY.
General Location Diagram
Transducer mounted to chair frame
Transducer mounted inside platform or riser
Transducer mounted beneath oor
General Information
Correct for all
Transducers
Correct for all
Transducers
Correct for TST329 and
AW339 Transducers ONLY