Installation guide

www.clarksynthesis.com
Tactile Sound Transducers
4
Supplied Parts
SUPPLIED PARTS (ILLUSTRATED BELOW)
A. (1) TST209 Transducer
B. (1) Unimount Bracket
C. (1) 3/8”-16 x 3” Hanger Bolt
D. (1) 3/8”-16 x 3” Threaded Stud
E. (1) 3/8”-16 x 1.5” Threaded Stud
F. (1) 3/8”-16 x 1” Hex Bolt
G. (4) #12 x 1” Screw
H. (2) 3/8” Jam Nut
I. (4) #12 Washer
J. (4) #12 Lock Washer
K. (1) 3/8” Washer
L. (1) 3/8” Lock Washer
M. (1) T-Nut
• InstallationGuide
REQUIRED TOOLS AND MATERIALS
Depending on your application, you will need
some or all of these tools and materials for your
installation:
•#2PhillipsScrewdriver
•(2)9/16”Open-EndedWrenches
•Drill
•Saw
•WireStripper
•SolderingGunorWireNuts
•Adhesive(constructionglue)
•Hardwood(oak,maple,ash,etc.,notpineor
softwoods) for creating mounting bridges
•SpeakerCable(min.16AWG;12-14AWG
recommended)
A
B
C D E
F
G H
I
K
L
J
M
Side View
3-D View
Front View