Installation guide

Tactile Sound Transducers
15
www.clarksynthesis.com
Right Front (RF) and Left Front (LF) Hookup
For this hookup, connect the RF and LF Pre-AmpOutputstotheamplierinputs.
NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs. If you
have a question about your receiver’s outputs, please consult your owner’s manual or contact your
receiver’s manufacturer.
Multiple Signal Hookup
Thiscongurationisalittlemorecomplicated.Youwillneedasmallmixer to make this work.
Connect the signals you want to use to the mixer input. Then, connect the mixer output to the
amplierinputusinga“Y” adapter.
L
L
R
R
OUT
OUT
OUTPUT
LF
LF CENTER LFE/SUB
CH4CH3CH2CH1
Pre-Amp Audio Out
Pre-Amp Audio Out
RF
RF
IN
IN
Y Adapter
Transducer
Transducer
Surround-Sound Receiver
Surround-Sound Receiver
Mixer
Output
Output
–
–
+
+
Amplier
(100 - 150
Watts into
4 ohms)
Amplier
(100 - 150
Watts into
4 ohms)
Wiring & Connections