Installation guide

Underwater Speaker
11
www.clarksynthesis.com
TROUBLESHOOTING
The speaker is buzzing:
The speaker stopped working:
The speaker has low output:
For additional questions/concerns/issues, contact Clark Synthesis or check our web
site.
In-wall installation: Insure the lock tab is properly inserted behind the lock tab receiving plate.•
Drop-in use: Insure the speaker is not vibrating against the pool wall.•
If the speaker stops playing, it is likely that the built-in protection circuit has activated. In the event •
this happens, turn the amplier off for approximately 60 seconds to allow the circuit to reset. Turn
down the volume on the stereo system and amplier. Operate the system at lower volume levels
to avoid overloading the speaker.
If the speaker still does not play, check to insure all wiring connections are properly connected and •
that output is coming from the audio system.
Check the amplier/receiver output settings to insure they are properly set.•
If you are using a DVD/CD/MP3 player, insure the output volume is set correctly.•
MANUFACTURER CONTACT INFORMATION:
Clark Synthesis, Inc.
Phone: [phone]
Fax: [phone]
Web: www.clarksynthesis.com
Email: [e-mail]