User's Manual

Clarius Ultrasound Scanner - HD3 Scanners Using the Charger
revision 1 27
• Clarius Scanner L15 HD3 (CIDN 99-13-00021)
• Clarius Scanner L20 HD3 (CIDN 99-13-00022)
• Clarius Scanner PA HD3 (CIDN 99-13-00023)
The Charger is designed for use in professional healthcare facilities. The device is not intended
to come in contact with the patient during normal use.
For regular maintenance, clean and disinfect the Charger. For cleaning instructions, see
Cleaning the Charger on page 35. For disinfecting instructions, see Disinfecting the Charger on
page 37.
The charger supports various USB-dedicated adapters and USB ports; however, these products
may cause the charger to fail or vary in charge time.
Do not use the Charger in air ambulances, regular ambulances, or the EMS environment in
general (including patient transportation and home healthcare).
• If the AC power cord is damaged, contact Clarius for a replacement.
• Charging the battery in a rotary-wing airborne ambulance may cause the battery charger’s
power supply to interfere with the aircraft's electrical system, causing a malfunction that
could lead to failure of control, instrumentation, and communication systems.
• Connecting the battery charger to a power supply that is not manufactured by Clarius may
have the incorrect voltage/current, which could damage the battery charger.
Components
The Charger is made of the following components:
• A fully assembled Charger (CIDN 50-02-00069).
• A power supply (CIDN 10-21-00006/Globtek GTM46161) with an adapter compatible with
your country's socket and voltage.
• A removable cable (CIDN 10-18-000026)
Technical Specifications
• Input:
• wall power supply: 100-240 VAC, 50-60 Hz, 0.45 A
• charger: 5 VDC, 3.2 A
• Output: