User's Manual

Clarius Ultrasound Scanner - HD3 Scanners Updating the Clarius Ultrasound Scanner
revision 1 26
Updating the Clarius Ultrasound Scanner
Software Updates
To update the software:
Go to the Apple App Store or the Google Play store.
Firmware Updates
If a Clarius Scanner HD3 software update is required, the Clarius App will notify you.
To update the firmware:
Tap Update.
During the update, the Clarius Scanner HD3 emits a purple flashing light. Also, a
purple indicator displays at the top right of the screen. Once the update is complete,
the Clarius Scanner HD3 light turns blue.
Using the Charger
The Clarius App displays the scanner’s battery level on your smart device. Because the Clarius
Scanner HD3 is battery-operated, you must recharge its battery when necessary. An empty
battery takes approximately 1 ½ hours to fully charge.
A fully charged battery gives you approximately 45 minutes of typical scanning time. Scanners
in sleep mode will send battery warning notifications, via BLE, using your smart device’s
standard notification services.
About the Charger
The Charger is included with your Clarius Ultrasound Scanner. It is designed to be used with
the following products:
• Clarius Scanner C3 HD3 (CIDN 99-02-00074)
• Clarius Scanner C7 HD3 (CIDN 99-13-00019)
• Clarius Scanner EC7 HD3 (CIDN 99-13-00024)
• Clarius Scanner L7 HD3 (CIDN 99-13-00020)