User`s guide

Clarity Visual Systems
October 1998
62
Menu
Selection
Description
Hours
Displays Lamp Hours and System Hours menu. The projection lamp
should be changed when it accumulates 3,000 operating hours and the
Lamp Hours reset.
Save
Configuration
Saves configuration for each video-input source. After saving, the
WN-5220-V may be power cycled without erasing the settings.
Recall Config.
Recalls previous user-saved configuration settings.
Reset Config
Resets the WN-5220-V VideoWall to factory default configuration
settings and erases all previous user settings.
Misc Control
Sharpness:
16M Colors:
Buzzer Enable:
Flip Horz:
Flip Vert:
Auto Lamp On:
525/625 Lines:
Sync On Green:
With the Sharpness On box checked, computer
graphics will look their clearest. When using
composite or other motion video, un-checking the
Sharpness On box will filter out some of the image
artifacts and makes the image look its best.
Selects between 16 million and 256 thousand colors
displayed.
Turns on or off the function indicator buzzer.
Flips the displayed video horizontally.
Flips the displayed video vertically.
After the standby timer elapses, the lamp will
automatically turn on if this box is checked.
With the VIM line-Doubler/Scaler and a 15.75 kHz
RGBS source (or Composite/S-Video source with the
VIM-200 option installed), it selects between 525
lines at 60 Hz (NTSC) and 625 lines at 50 Hz (PAL).
Allows CSYNC signals (on the 9-pin or BNC
connectors) that utilize the sync on green format to
be decoded and displayed properly. Does not work
with MAC II sync on green.
About
Clarity Visual Systems’ address and phone number. It also displays
the Firmware version.
RS-232 Control