User`s guide

WN-5220-V VideoWall User’s Guide
57
Interface and Controls
Rear Panel Indicators, Connectors and Controls
The rear panel of the WN-5220-V VideoWall is shown below.
The S-Video and Composite Video inputs are part of the VIM-200 option.
Rear Panel Indicators
Indicator Description
STBY
LED, on steady when unit is in STBY mode and main
electrical power is switched on. This LED blinks for 3
minutes when the main power is initially switched on or
when the lamp is switched off to enter STBY mode. When
blinking, projection lamp power on is inhibited.
FAN
LED, on during cooling fan operation. Remains on for 3-
minute cool-down cycle after lamp is switched off.
LAMP
LED, on during projection lamp operation.