User`s guide

WN-5220-V VideoWall User’s Guide
43
Reset to Factory Defaults
Resetting any of these modes will overwrite any user saved settings for
that mode. It restores all settings to the factory defaults.
Source Select
Frequency
Phase
Input Level
Position
Zoom
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Reset Configuration
[X] All Modes
[ ] VGA Mode
[ ] MAC II Mode
[ ] 31.5K Mode
[ ] 15.75K Mode
[ ] Comp Video
[ ] S-Video
(The menu pictured here is with the VIM-200 option installed.)
1. Press the MAIN
MENU button on
the remote.
The Main menu is displayed.
2. Press the
up/down arrow
keys as required.
Move the cursor to the Reset Config selection.
3. Press ENTER
The Reset Configuration menu is displayed.
4. Press up/down
arrow keys
Use the arrow keys to select the factory default settings
for the current source.
5. Press ENTER
Press the ENTER button to restore the factory default
settings for the current source.
6. Press PREV MENU
Exit the Reset menu.