User`s guide

Clarity Visual Systems
October 1998
40
Auto Lamp On
1. Press the
up/down arrow
keys as required
Move the cursor to the Auto Lamp On selection.
2. Press ENTER
When enabled, the lamp will automatically come on after
the 3 minute standby timer has elapsed.
525/625 Lines
(This is only functional with the optional VIM module installed.)
1. Press the
up/down arrow
keys as required
Move the cursor to the 525/625 Lines selection.
2. Press ENTER
When enabled, the VideoWall will display 625 line 50 Hz
video correctly. When not enabled it will display 525 line
60 Hz video correctly.
With Comp Video or S-Video selected, the correct line number is
automatically selected.
Sync on Green
1. Press the
up/down arrow
keys as required
Move the cursor to the Sync on Green selection.
2. Press ENTER
When enabled, the VideoWall will decode the composite
sync on green signals and properly display the image.
This function only works with the RGBS 9-pin and
BNC connections and not with the MAC II source.