User`s guide

Clarity Visual Systems
October 1998
30
Step 4 - Save the Settings
Source Select
Frequency
Phase
Input Level
Position
Zoom
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Save Configuration
[X] All Modes
[ ] VGA Mode
[ ] MAC II Mode
[ ] 31.5K Mode
[ ] 15.75K Mode
[ ] Comp Video
[ ] S-Video
(Misc Control menu shown with the VIM-200 option installed)
After all adjustments are made, save the settings. There is a
separate save location for each source listed in this menu. After
adjusting the VideoWall for a particular source, save the settings
before configuring for another source.
1. Press the remote
control MENU
button
The Main menu is displayed.
2. Press the
Up/Down arrow
keys
Move the cursor to the SAVE CONFIG selection.
3. Press ENTER
The SAVE menu is displayed.
4. Press the left
arrow key
Move the cursor to the YES selection.
5. Press ENTER
The current settings are saved, and will remain in effect
even after the power is cycled. Save the settings for each
display in the system.