Product data

WN-5220-V Module Level Service Guide
13
Service Menu
The Service Menu provides access to the several options that can be useful in diagnosing
failures and setting-up the displays. The service menu for both the older electronics (one
Monitor ID knob) and the newer electronics (two Monitor ID knobs) is accessed the same way,
but the contents of the two menus are different.
On the older electronics, the Service Menu was added at revision 3. Firmware older than
revision 3 does not have the Service Menu feature.
To access the Service Menu, bring up the main menu and go to the About sub-menu where it
shows the Clarity (or OEM) address and phone number.
Older Electronics
Firmware version 3 or higher
Source Select
Frequency
Phase
Input Level
Position
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Clarity Visual Systems
9025 SW Hillman Court
Suite 3122
Wilsonville, OR 97070
[phone]
Firmware Revision 03e
OR
Newer Electronics
Source Select
Frequency
Phase
Input Level
Position
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Clarity Visual Systems
9025 SW Hillman Court
Suite 3122
Wilsonville, OR 97070
USA
Tel[phone]
Web www.ClarityVisual.com
Project: 574-0003-00
Version: RevA
Build: 0155
Date: Fri, Aug 29, 1997
Press the following arrow keys on the remote in sequence:
! ! # $ %
UP UP RIGHT LEFT DOWN