User`s guide

Clarity Visual Systems
November 1998
82
Function RS-232 COMMANDS
RS-232
DATA Comments
System Controls Increment Decrement Get Set
Auto White Input Level Adjust AWL
Auto Black Input Level Adjust ABL
Input Level Adjust ALL OAU OAD QA#
Input Offset Adjust Red ORU ORD OR$ QR#
Input Offset Adjust Green OGU OGD OG$ QG#
Input Offset Adjust Blue OBU OBD OB$ QB#
Frequency Adjust FRU FRD FR$ FW#
Phase Adjust PHU PHD PR$ PW#
Sharpness SON SOF SO*
256k Colors CLO CL* Responds with “0” for 256k
16M Colors CHI “ Responds with “1” for 16M
H-Position Right HPR HR$ HW#
H-Position Left HPL
V-Position Up VPU VR$ VW#
V-Position Down VPD
Decoder Controls
Brightness D1U D1D D1$ E1#
Contrast D2U D2D D2$ E2#
Saturation D3U D3D D3$ E3#
Hue D4U D4D D4$ E4#
Monitor Setup / Control
Color Balance Menu Display BAL
Red Color Balance Adjust BRU BRD BR$ CR#
Green Color Balance Adjust BGU BGD BG$ CG#
Blue Color Balance Adjust BBU BBD BB$ CB#
Gamma Control GON GOF GO*
Test Signal Controls
Test Signal Disable (Pass Video) TSD TS* TSD Will Clear All Color Registers
Test Signal - White Field WHT
Test Signal - 50% Gray Field GRY
Test Signal - Black Field BLK
Test Signal - Red Field RED
Test Signal - Green Field GRN
Test Signal - Blue Field BLU
Test Signal - Geometry Pattern GEO
Test Signal - Data Red TR#
Test Signal - Data Green TG#
Test Signal - Data Blue TB#
H- Image Control 0 (H-No Flip) HF0 HF*
H- Image Control 1 (H-Flip) HF1 “
V- Image Control 0 (V- No Flip) VF0 VF*
V- Image Control 1 (V-Flip) VF1 “
ACK/NAK
Received Valid Command (1) ACK
Received Invalid Command NAK
Notes:
•
(*) Indicates an ASCII character is returned from the cube in this location.
•
($) Indicates 8-bit data is returned from the cube in this location
•
(#) Indicates 8-bit data is transmitted to the cube in this location
•
(1) ACK or NCK will be transmitted following the video cube receiving a non-global instruction. For commands
which request data transmitted back the transmitted response will be the acknowledge.