User`s guide

WN-5220-S VideoWall User’s Guide
77
Menu
Selection
Description
Hours
Displays Lamp Hours and System Hours menu. The projection lamp
should be changed when it accumulates 3,000 operating hours and the
Lamp Hours reset.
Save Config
Saves configuration for each video-input source. After saving, the
WN-5220-S may be turned off and on without erasing the settings.
Settings may be saved for all sources, or only for some selected
sources.
Recall Config
Recalls previous user-saved configuration settings. Recall may be for
all sources, or only for some selected sources.
Reset Config
Resets the display to factory default configuration settings and erases
all previous user settings. Reset may be for all sources, or only for
some selected sources.
Misc Control
Sharpness:
16M Colors:
Buzzer Enable:
Flip Horz:
Flip Vert:
Auto Lamp On:
Test Patterns:
With the Sharpness On box checked, computer
graphics will look their clearest. When using
composite or other motion video, un-checking the
Sharpness On box will filter out some of the image
artifacts and makes the image look its best.
Selects between 16 million and 256 thousand colors
displayed.
Turns on or off the buzzer that sounds briefly for
every Remote Control key press.
Flips the displayed video horizontally.
Flips the displayed video vertically.
After the standby timer elapses, the lamp will
automatically turn on if this box is checked.
Displays a list of the internal test patterns available.
About
Clarity Visual Systems’ address and phone number. It also displays
the Firmware version.