User`s guide

WN-5220-S VideoWall User’s Guide

Remote Button Description

Mon Sel

Allows you to disable or enable the control of this display with the remote

control. This is useful when configuring multiple displays in a video wall,

to prevent remote adjustments on all units except one. Also prevents

interference of the from strong ambient sources of IR radiation.

Displays current setting of the Monitor ID switches. Group numbers are 0-

F (0 – 15) and Unit numbers are also 0-F (0 – 15), giving a total

addressable range of 256. In a video wall, all units should have the same

Group number and different Unit numbers.

Displays the Main Menu, from which all other functions may be selected

and set by navigating with the arrow keys. The following items in the

Main Menu are also available from dedicated buttons, providing shortcuts

to the most commonly used functions: Source, Curtain, Level, Phase,

Freq, Color, Reset. (If the Main Menu is visible, pressing Menu again

closes it.)

Prev Menu

Closes the current menu and moves the cursor to the parent menu.

Enter

Accepts the current menu selections, or opens the selected sub-menu.

Up/Down arrow

buttons

Navigate through the menus. The up/down arrows move up and down a

menu. They never make a selection. Use Enter or the Left/Right keys to

make selections. The only menu in which Up/down does not move you to

a new menu item is in Positioning.

Left/Right

arrow buttons

The Left/Right arrows are used to make choices from multi-choice menus,

such as Mode and Source Select. They do

not

navigate through the

menus. Use the Up/Down arrows to navigate, even for items in two

columns, such as those found in the Color menu.