User`s guide

Clarity Visual Systems
November 1998
36
Scale the Image
This feature is only enabled with the VIM-300 option installed.
Source Select
Frequency
Phase
Input Level
Position
Zoom
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Zoom Factor
- +
Left
"#" "$
W:0640
Right
"#" "$
Top
"#" "$
H:0480
Bottom
"#" "$
[ ] Lock
[ ] Default
Use the arrow keys to adjust the size of the image on each display.
1. Press the MENU
button on the
remote control
Displays the main menu.
2. Press the Up/Down
arrow keys
Move the cursor to the Zoom selection.
3. Press ENTER
Displays the Zoom Factor menu.
4. Scale the image
Select an edge of the image that needs to be expanded or
compressed (Left, Right, Up or Down). It is easiest to see
the effect of Zoom when the image is a some form of
geometry pattern, one that exactly defines the edges of the
image.
Selecting the Lock feature causes the image to scale the
same amount in the opposite direction. If you scale the
Right, the Left will scale by the same amount. Similarly, Up
and Down
The Default feature scales the image back to 800x600 or
640x480 pixels, depending on the source.